IFR FM/AM-1200A

4-11-3 ALLOWABLE RS-232 COMMAND FORMATS
FM/AM-1200S/A communication with an external controlling device requires
use of the allowable RS-232 command formats listed in Table 4-12.
COMMAND
DEFINITION EXAMPLE
FUNC=VALUE
Sets memory location
0
of AFF=12345 .6
(CR or
Colon)* selected function to value Sets Tone
Generator
selected and executes i t • memory location
0
to 12345.6 Hz and
executes
it.
Func(nn)=VALUE*
Programs memory location RFF6=345 .6666
FUN C
(CR
4-52
02
(CR
FUN C
or
FUN C
( 0 to
15 )
of
selected Programs RF
Fre-
function
to value
selected. quency memory
l
oca-
Does not execute selection. tion 6 to 345.6666
MHz.
or Colon)* Executes val u e
of
selected DTMF:
function stored i n
memory
Executes
value
location
0 •
stored i n DTMF
memory location
\L
( n n )
Executes value of selected
PULSE
12:
Colon)* memory location ( 0 to
15 )
Executes value
of selected function.
stored i n memory
location 12 of the
PULSE
function.
(nn)?* Displays on V FD the value
R F F2?
*
of selected
memory location Displays
value of
( 0 thru
15 ) of the selected RF memory location
function.
2 •
AFF10?
Displays value of
Tone
Generator
memory
location 10.
FUNC = AFF, DPX, DCS, DTM, DTMF, MTR1, MTR2, PUL, PULS,
PULSE,
RFF or WAV.
(nn) = function preset number (0 thru 15).
Linefeed, Carriage Return or Colon= terminates command.
Value = function command value field.
Table 4-12 Allowable Command Formats