IFR FM/AM-1200A

5-11-5 RS-232 COMMANDS FOR TRACKING GENERATOR
RS-232 Command
Definition
Range of Values
DPL=
Set
Duplex Level HIGH,
LOW
(Tracking
Generator
disabled)
DPL? Return
Current Duplex
Level
HIGH, LOW, OFF
(OFF
returned
if
Tracking
Generator
enabled)
TGL=
Set
Tracking Generator Level HIGH, MED,
LOW
(Duplex disabled)
TGL= Return Current Tracking HIGH, MED,
LOW, OFF
Generator Level (OFF
Returned
if Duplex
enabled)
TGA=
Enable/Disable Tracking ON,
OFF
Generator Adjust.
(Tracking
Generator Level must be set.)
Note: Tracking Generator
Adjust must
be disabled when
adjustments are complete.
TGA+
Tracking Generator Adjust
Positive (Tracking Generator
Adjust must
be
enabled)
TGA-
Tracking Generator Adjust
Negative (Tracking Generator
Adjust
must
be enabled)
TGR
Reset Tracking Generator
Adjust Reference Number
Table 5-6 Tracking Generator RS-232 Commands
5-20
05