IFR FM/AM-1200A

Key will change polarity between INVERT and
NORMAL.
Enter desired DCS Code and Polarity into memory.
Depress ~ Key.
i'=i
4-3-6 Programmed T SEQ Memory
T SEQ programs the ON time and OFF time of each of the 16 tone memory
locations. All 16 (QJ thru 15) locations must be programmed as all tone
locations will be executed in sequential order. Any tone memory loca-
tions which are not to be executed by the T SEQ function must be given
no ''ON TIME'' and no "OFF TIME''.
KEY ENTRY VFD (37) INDICATES
PROG
-
METER
2ND
-
FUNCT
1:1
LI:;QJ
TONE MEMORY
LOCATION
NUMBER
ON
TIME
OFF
(DEAD)
TIME
~
Use ~ Key to set tone memory location
IIITI lol I
number to zero.
t and ~ Key in the T SEQ Mode are used to
scroll through the tone memory location numbers
only.
4-15