IFR FM/AM-1200A

Program any one of the memory locations by selecting the number, letter
or symbol corresponding to that memory location as shown in Table 4-1.
KEY ENTRY
VFD (37) INDICATES
1
!!!!!!:
10 PS
/1!1/ KEY IS USED TO CHANGE SIGN
Enter desired offset frequency into memory.
Depress
Maximum frequency is ±49.99. Any frequency
above ±49.99 will default to ±49.99 although
the entered frequency will be displayed on
VFD (37).
Leave memory location 0 for the direct mode
operation because it will change the stored
memory data.
4-3-5 Programmed DCS Memory
KEY ENTRY
VFD (37) INDICATES
PROG
-
METER
2ND
-
FUNCT
4-14
02
Key.