IFR FM/AM-1200A

5-10-5 EXECUTING FIVE DIGIT FORMAT IN RECEIVE MODE
To receive a tone sequence, program the applicable tone format and per-
form the following steps:
STEP PROCEDURE
1. Turn MODE Select Control (39) to "REC''.
2. Turn MODULATION Select Control (3) to ''FM NAR''.
3. Enter the applicable RF Frequency (ref. paragraph 4-2-1 and
4-3-1) 0
4. Press:
The VFD will display:
lllclclrl~<l I 1--1--1--1--1--1 I I I I Ill
until a tone
be displayed
sequence is decoded. The decoded tone sequence will
0 n the v F D u n t i l r-fif~ 2ND. I ] I i s pressed a g a i n 0
---
;~ FUNC_T OPT
[NOTE\
When decoding tone sequences, an ''R'' will only ap-
pear if the first tone received is the repeat tone:
lllclclriRI I 1~<1: I21Jilil I I I I Ill
In all other sequences, the repeat tone will be
automatically decoded as the preceeding digit; e.g.:
lllclclrl,l<l I 1,91 : 1212121 I I I I Ill
Compliance with the following will avoid confusion
in the decoding process:
1. Do not execute the receive option when there is
activity on a receive channel.
2. When decoding sequential numbers or when a poor
signaling environment is present, the code should be
entered several times to eliminate the possibility of
error.
5-11
05