IFR FM/AM-1200A

l
!
•
FM/AM-1200S/A communication with an external controlling device
requires use of the allowable GPIB command formats listed in Table 5-7.
COMMAND DEFINITION
EXAMPLE
FUNC=VALUE Sets memory location 0 of AFF=12345.6
( C R
or Colon) selected function to value
Sets Tone Generator
selected and executes it. memory location 0
to 12345.6 Hz and
executes
i t .
Func
(nn)=Value*
Programs
memory
location RFF6=345.666
FUNC (CR
5-28
05
Func
(
C R
or
FUNC
(0 to 15) of selected
Programs RF
function to value selected. Frequency
memory
Does
not execute function. location
6 to
345.6666 MHz.
or Colon) Executes value
of selected DTMF:
function stored in memory
Executes value
location 0.
stored i n DTMF
memory location 0.
(nn) Executes value of selected
PULSE 12 :
Colon)
memory
location (0 to 15)
Executes value
of selected function.
stored i n
memory
location
12 of the
PULSE function.
(nn) ?* Displays
on V FD the value RFF2?
*
of selected memory location
Displays value of
(0 thru 15) of the selected RF memory
location
function.
2.
AFF10?
Displays
value of
Tone
Generator
memory location 10.
FUNC = AFF, DPX, DCS, DTM, DTMF, MTR1, MTR2, PUL, PULS,
PULSE, RFF or WAV.
(nn) = function preset number (0 thru 15).
Linefeed, Carriage Return or Colon = terminates command.
Value = function command value field.
Table 5-9 GPIB Command Format