IFR FM/AM-1200A

.
l
!
•
FUNCTION
STEP
SQUELCH
5-38
05
GPIB COMMAND
DESCRIPTION
STEPR
=
x.xxx MHz
Sets
RF Step
Increments.
STEPR? Displays current
RF STEP setting.
SlEPT
=
X. X Hz Sets
Tone
STEP Increment.
SlEPT? Displays
current Tone STEP setting.
STEPR+
Increments RF
by RF STEP
setting.
STEPR-
Decrements RF
by RF STEP
setting.
SlEPT+ Increments
Tone by Tone STEP
setting.
SlEPT- Decrements Tone by
Tone STEP
setting.
SQUELCH? Returns 1 for 0, squelched
(1)
or unsquelched ( 0) .
Table 5-10 GPIB Commands (Continued)