ILMOR MV-10 - Engine Fastener Torque Specifications

Owner’s Manual &
Installation Instructions
Revision 6e
Page 47
Engine Fastener Torque Specifications
Main Studs 85 ft lb
Main Cross Bolts 40 ft lb
Cam Thrust Plate 210 in lb
w/ blue loctite
Cam Gear 200 in lb w/ blue loctite
Rear Crank Seal Cover 95 in lb
Lifter Yokes 95 in lb
Connecting Rod Bolts 50 ft lb 550hp, 570hp, 625hp models
75 ft lb 7-10 model
Scraper 17 ft lb w/ blue loctite
Front Cover 204 in lb
Oil PRV Plug 25 ft lb
Oil Pick-up tube 95 in lb
w/ blue loctite
Oil Pan Bolts 1/4-20 95 in lb
5/16-18 200in lb
Oil filter 160 in lb
Cylinder Head Bolts 1/2-20 90 ft lb
1/4-20 95 in lb
Rocker Pedestals 26 ft lb
Valve Cover 95 in lb
Intake Manifold 95 in lb
w/ blue loctite
76 in lb w/ torque adaptor w/ blue loctite
Throttle Body 95 in lb w/ blue loctite
Fuel Rail 105 in lb w/ blue loctite
Throttle Lever 70 in lb
Throttle Bracket 95 in lb
w/ blue loctite
Throttle Clamp 60 in lb
Coil Packs 95 in lb
w/ blue loctite