For
weather
band channel and S.A.M.E. code
in
your
area, call
1-888-697-7263,
or
visit
www.nws.noaa.gov/nwr/indexnw.htm
Programming
a
Single
S.A.M.E.
County
Code
1.
Turn off the unit by pressing POWERC,)AL OFF
on
top
of
the unit.
2.
Press SETUP to open menu options.
3.
Rotate the SEARCH wheel to scroll through menu options until
"3.
COUNTY CODE" is
displayed.
4.
Press ENTER followed by SEARCH wheel to scroll through "ALL", "SINGLE" or "MULTIPLE".
5.
Choose "SINGLE", followed by ENTER. "Code 01" will be displayed and the first digit space will
start blinking.
6.
Use the SEARCH wheel to scroll through the digits 0-9. Input the first digit and press ENTER to
save that selection and move to the next digit.
7.
Continue programming all 6 digits this way. When finished, press ENTER and your entered code
will be saved.
8.
Press SETUP to exit setup menu.
Note: The single county code
you
set will automatically become "CODE 01"
of
multiple county codes.
Programming
Multiple
S.A.M.E.
County
Codes
1.
Press SETUP
in
power off mode to open menu options.
2.
Rotate the SEARCH wheel to scroll through menu options until
"3.
COUNTY CODE"
is
displayed.
3.
Press ENTER and then SEARCH wheel to scroll through "ALL", "SINGLE" or "MULTIPLE".
4.
Choose "MULTIPLE", and press ENTER.
5.
Use the SEARCH wheel to scroll through code locations 1-25. (You are able to program up to
25 different county codes into your device).
6.
Choose the location you want and press ENTER. The first digit space will start blinking.
7.
Use the SEARCH wheel to scroll through the digits 0-9. Input the first digit and press ENTER to
save that selection and move to the next digit.
8.
Continue programming all 6 digits this way. When finished, press ENTER and your code will be
saved.
9.
To program your next code, rotate the SEARCH wheel to go to the next code location.
When
you
have entered all your desired codes, press SETUP to store your settings.
For
weather
band channel and S.A.M.E. code
in
your
area, call
1-888-697-7263,
or
visit
www.nws.noaa.gov/nwr/indexnw.htm
Programming
a
Single
S.A.M.E.
County
Code
1.
Turn off the unit by pressing POWERC,)AL OFF
on
top
of
the unit.
2.
Press SETUP to open menu options.
3.
Rotate the SEARCH wheel to scroll through menu options until
"3.
COUNTY CODE" is
displayed.
4.
Press ENTER followed by SEARCH wheel to scroll through "ALL", "SINGLE" or "MULTIPLE".
5.
Choose "SINGLE", followed by ENTER. "Code 01" will be displayed and the first digit space will
start blinking.
6.
Use the SEARCH wheel to scroll through the digits 0-9. Input the first digit and press ENTER to
save that selection and move to the next digit.
7.
Continue programming all 6 digits this way. When finished, press ENTER and your entered code
will be saved.
8.
Press SETUP to exit setup menu.
Note: The single county code
you
set will automatically become "CODE 01"
of
multiple county codes.
Programming
Multiple
S.A.M.E.
County
Codes
1.
Press SETUP
in
power off mode to open menu options.
2.
Rotate the SEARCH wheel to scroll through menu options until
"3.
COUNTY CODE"
is
displayed.
3.
Press ENTER and then SEARCH wheel to scroll through "ALL", "SINGLE" or "MULTIPLE".
4.
Choose "MULTIPLE", and press ENTER.
5.
Use the SEARCH wheel to scroll through code locations 1-25. (You are able to program up to
25 different county codes into your device).
6.
Choose the location you want and press ENTER. The first digit space will start blinking.
7.
Use the SEARCH wheel to scroll through the digits 0-9. Input the first digit and press ENTER to
save that selection and move to the next digit.
8.
Continue programming all 6 digits this way. When finished, press ENTER and your code will be
saved.
9.
To program your next code, rotate the SEARCH wheel to go to the next code location.
When
you
have entered all your desired codes, press SETUP to store your settings.
To Next Page
Loading...
