EasyManua.ls Logo

ILX Lightwave LDC-3700B Series - Page 84

ILX Lightwave LDC-3700B Series
152 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
COMMAND REFERENCE
Command Reference
7/01 LDC-3700 Series 69
CHAPTER 4
The LASer:DISplay:MDI command sets the laser display to show the monitor photodiode current measurement.
Parameters None.
Notes The actual (LASER DISPLAY) I
PD
display is turned off automatically when another LASER DISPLAY
selection is enabled.
Examples "LAS:DIS:MDI" −action: enables the LASER display for photodiode current values.
Laser:Disp:Mdi" −action: enables the LASER display for photodiode current values.
The LASer:DISplay:MDI? query returns the status of the (LASER DISPLAY) I
PD
switch.
Notes In local operation, the status of the I
PD
switch is indicated by the enunciator next to the LASER
display (µA will be illuminated when the display is in I
PD
mode).
Examples "LAS:DIS:MDI?" −response: 0, means that the (LASER DISPLAY) I
PD
switch is not currently active,
laser photodiode monitor current is not displayed.
"Las:dis:MDI?" −response: 1, means that the (LASER DISPLAY) I
PD
switch is currently active,
monitor PD current may be displayed.
The LASer:DISplay:MDP command sets the laser display to show the monitor photodiode power
measurement.
Parameters None.
Notes The actual (LASER) P
PD
display is turned off automatically when another LASER DISPLAY
selection is enabled.
Examples "Las:Display:MDp" −action: enables the LASER display for photodiode power values.
"Laser:Disp:MDP" −action: enables the LASER display for photodiode power values.
The LASer:DISplay:MPD? query returns the status of the (LASER DISPLAY) P
PD
switch.
Notes In local operation, the status of the P
PD
switch is indicated by the enunciator next to the LASER
display (mW will be illuminated when the display is in P
PD
mode).
Examples "LAS:DISp:MDp?" −response: 0, means that the (LASER DISPLAY) P
PD
switch is not currently
active, laser photodiode monitor power is not displayed.
"Las:dis:MDP?" −response: 1, means that the (LASER DISPLAY) P
PD
switch is currently active, PD
power may be displayed.
LASer:DISplay: IDP
MDI
COMMON
DEVICE DEPENDENT
FRONT PANEL
LASer:DISplay: IDP?
MDI?
COMMON
DEVICE DEPENDENT
FRONT PANEL
LASer:DISplay: PPD
MDP
COMMON
DEVICE DEPENDENT
FRONT PANEL
LASer:DISplay: PPD?
MDP?
COMMON
DEVICE DEPENDENT
FRONT PANEL
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents

Related product manuals