TRADUCTION OF THE ORIGINAL INSTRUCTIONS FOR USE
BS 400/60 AFI-Eing ED.2011 rev.00 34/60
24 - MAINTENANCE - for skilled personnel
-----------------------------------------------------------------------------------------------------------------------------------------------
IMPORTANT
-----------------------------------------------------------------------------------------------------------------------------------------------
If you want to make some special maintenance/disassembly/resetting operations on the machine, it is
necessary to know all information concerning safety procedures.
The skills of specialized personnel allow to solve more easily all problems found by the user when running the
saw. This allows also to safeguard the technical, production and safety features of this equipment, according
to the initial setting by the manufacturer.
To get a detailed knowledge of this machine you can find here enclosed:
- Electrical scheme/s: divided into theme tables and made according to the current norms concerning this
subject, with index, material indication, reference code numbers.
- Pneumatic and hydraulic circuits
- Drawings: divided into the main parts the saw is comprised of. They code each mechanical component.
The electrical/electronic/pneumatic or hydraulic components are not showed in these drawings but
only in the aforementioned schemes.
If the users want to know this saw in detail, they can study this manual and follow its indications meticulously,
but they do not have to modify any parts of this equipment, since by doing so the DECLARATION OF
CONFORMIITY would lose its validity
To Next Page
Loading...
