4
6
5
1
2
3
3
1
4
2
2
1
4
5
6
5
6
INSTALLERUSER
MAINTENANCE TECHNICIAN
10
1.5 INSTALLATION INSIDE THE RECESSED FRAME
OPTIONAL.
e boiler is designed for installation inside the Immergas re-
cessed frame (supplied as optional). e necessary parts for this
type of installation (brackets) must also be purchased separately
as optional kit.
To install proceed as follows:
- Install the bracket (2) inside the recessed frame xing it with the
screws (3) in the pre-drilled holes (Fig. 4).
- Hang the boiler (4) to the bracket (2) (Fig. 5).
- Block the boiler (4) by mounting the brackets (5) and xing them
with their screws (6) (Fig. 6).
e brackets (5) used to centre the boiler on the frame and hold
it in place stop against the frame (1) so do not require xing to
the frame itself.
To Next Page