EasyManua.ls Logo

Immergas Victrix Tera 38 1 - Boiler Components; Kits Available on Request

Immergas Victrix Tera 38 1
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
INSTALLERUSER
MAINTENANCE TECHNICIAN
31
1.30 BOILER COMPONENTS.
Key:
1 - System expansion vessel
2 - Burner
3 - Ignition/detection electrode
4 - Air intake pipe
5 - Flow probe
6 - Fan
7 - Condensate drain trap
8 - D.H.W. ow switch
9 - Gas nozzle
10 - Gas valve
11 - DHW heat exchanger
12 - System draining valve
13 - DHW probe
14 - Sample points (air A) - (ue gases F)
15 - Flue probe
16 - Condensation module
17 - Venturi
18 - Return probe
19 - System pressure switch
20 - Air vent valve
21 - Boiler pump
22 - 3 bar safety valve
23 - Bypass
24 - 3-way valve (motorised)
25 - Valve drain tting signal
26 - System lling valve
1.31 KITS AVAILABLE ON REQUEST.
• System shut-o valve kits with or without inspection lter
(on request). e boiler is designed for installation of system
interception cocks to be placed on ow and return pipes of the
connection assembly. is kit is particularly useful for mainte-
nance as it allows the boiler to be drained separately without
having to empty the entire system. Moreover, the version with
lter preserves the operating features of the boiler thanks to its
inspectionable lter.
• Polyphosphate dispenser kit (on request). e polyphosphate
dispenser reduces the formation of lime-scale and preserves the
original heat exchange and domestic hot water production condi-
tions. e boiler is prepared for application of the polyphosphate
dispenser kit.
N.B.: this is a type of chemical conditioning treatment for do-
mestic hot water, if provided for by current regulations.
• Cover kit (on request). If installed outdoors in a partially pro-
tected place with direct air intake, it is compulsory to mount the
appropriate top protective cover for the correct functioning of
the boiler and to protect it from adverse weather conditions.
• Cycloidal lter kit (on request). e magnetic cycloidal lter is
able to detect the ferrous residues present in the system's water.
anks to the two cocks in the kit, it facilitates maintenance by
cleaning the lter without having to empty the circuit.
e above-mentioned kits are supplied complete with instructions
for assembly and use.

Table of Contents