Name: Implen P 300
Brand: Implen
Rating: 4 (1 reviews)

To Next Page

To Previous Page

NanoPhotometer

P-Class User Manual

Version 2.1 Page 21 / 70

Results Screen

Step 10 Apply/insert the reference sample. Press Blank Key. This

will be used for all subsequent samples until changed.

Step 11 Apply/insert sample and press Sample . This measures

at both 260 and 280 nm wavelengths and displays the

result. Protein concentration is calculated (corrected by

background wavelength value if selected).

Step 12 If the absorbance value of the sample is not in the linear

range a “Warning message” will pop up and “Instruction”

will be displayed in the top left corner of the result screen.

Please refer to 3.2 Software instructions/important

information on page 11 for further information.

Step 13 Repeat for all samples.

Step 14 Press Menu/Options to display available Options which are

described on page 8.

Step 15 Press Escape and confirm with Yes to return to the

Protein folder

To change parameters, print or save methods press the Menu/Options button. The options menu will be opened. For

further explanation please see 2.3 Keypad and display on page 6 (P 300) and 7 (P330 / P 360).

Questions and Answers:

Need help?

Do you have a question about the Implen P 300 and is the answer not in the manual?

Implen P 300 Specifications

General