NanoPhotometer
®
P-Class User Manual
Version 2.1 Page 62 / 70
2. Place the new gaiter in the gap and in a first step place inner flute and in the second step the outer
flute.
8.5 Cleaning and general care of the instrument
External cleaning
Switch off the instrument and disconnect the power cord.
Use a soft damp cloth.
Clean all external surfaces.
A mild liquid detergent may be used to remove stubborn marks.
NanoPhotometer
®
P-Class design edition (glossy anthracite):
All painted surfaces of the NanoPhotometer
®
P-Class can be cleaned with a soft damp cloth and approved cleaning or
disinfectant solutions.
Caution
Product damage by wrong cleaning or disinfection
Desinfection or cleaning only by wiping, no spraying.
Use no solvents or aggressive chemicals.
Approved disinfectant solutions:
Apesin disinfection spray (Tana Chemie GmbH)
Incidin Liquid and Incidin Foam (Ecolab)
Lysoformin Spezial (Lysoform Dr. Hans Rosemann GmbH)
Observe all necessary precautions if dealing with hazardous samples or solvents.
Changing cell holder or removal for cleaning
This can be removed by undoing the appropriate screws on the bottom of the instrument.
The symbol on the product, or on the documents accompanying the product, indicates that this appliance may not
be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations
for waste disposal.
To Next Page
Loading...
Need help?
General
