Reports Setup Page 9 - 1
9
Use this menu to program reports to print or
FAX automatically on a schedule
(faxing
requires an optional Fax/Modem device).
See Chapters 1, 10, 11 and 12 about Tank and
Line Test Reports & Scheduling.
See TABLE 9.1 –
The SHIFT
selection allows
2
or 3 scheduled reports to print or Fax per day
...only one report will print if two report-times
are duplicated / identical.
The asterisked (
*
) menus are hardware or
software dependent and may/may not appear.
Push
UP/DOWN
▲
▼ keys to show more
menus or menu selections.
To access menus, press the corrsponding (M)
key below each menu name.
9 Reports SETUP PROGRAMMING
Reports Menu
H U
MENU
× Press this key in the highlighted
7
sequence shown below
NOTES
☞
REPORT SCHEDULE (MORE)
TANK INV TANK SUM PROD INV PROD SUM
Press the
DOWN
▼ key...
REPORT SCHEDULE (MORE)
PROD USE USE SUMRY DEL DETAI DEL SUMRY
Press the
DOWN
▼ key to show more menus...
REPORT SCHEDULE (MORE)
DELIV HST ACT ALRM CLR ALRM ALARM HST
REPORT SCHEDULE (MORE)
SCALD* SENS STAT* VAPOR* REGULTORY
TABLE 9.2 24 Hour Time Input Format
HH:MM:SS
00:00:00 = midnight
22:00:00 = 10 pm + 12 ( hours )
( add 12 hours to pm times starting at
1 pm to 11:59 pm
)
02:05:00 = 2:05 am
TABLE 9.1 Typical Report Schedule
NONE
(no schedule)
SHIFT 1ST DAY
DAILY :
MONDAY 30TH DAY
: LAST DAY
SUNDAY (
Feb. does not have 30 days)
See the Table of Contents to find topics in
this manual. See the Preface for general
information about this manual. And see the
Installation, Operator’s, TroubleShooting
Guides, and Application Notes for other
reference material.
Contents:
– Tank – Product – Delivery
– Alarm – SCALD – Sensor
– Regulatory – Line
– Reconcile & – Sales
Reports
SELECT MENU OPTION
SETUP UPGRADE LANGUAGE DATALOG
M1 M2 M3 M4
SETUP MENU (MORE)
EXIT SYSTEM TANKS PROBES
SETUP MENU (MORE)
PRODUCTS MANIFOLDS*
REPORTS
LK TSTS
M1 M2 M3 M4
REPORT SCHEDULE (MORE)
LINE COMP* LINE DIAG LINE HIST* LINE TEST*
REPORT SCHEDULE (MORE)
RECONCILE* SALES*
To Next Page
Loading...
Need help?
General
