12
Safety Precautions and Technical Details
DAA007EN - 11.05.2021
GENERAL INSTRUCTIONS FOR SAFE OPERATION
2.9 Workspace of the operator
It is recommended that a working area of at least 1 m is kept free around the ma-
chine (including attached units) for operator activities.
Workspaces can vary depending on the activity.
The following activities, among others, can occur during production:
• Operating the machine from the operating panel
• Loading and unloading workpieces
• Refilling bar stock in the loading magazine, if one is present
• Removing chips in the work area and on the chip conveyor, as needed
• Emptying the chip container
• Observing and maintaining the process at the operating panel and in the work
area
• Removing and measuring workpieces
• Checking operating fluids (such as hydraulic fluid, lubricant, cooling lubricant) and
refilling if necessary
• Changing tools on the tool magazine or in the work area
• If needed: making adjustments for tool wear in the machine control system
A different workspace may apply during the following activities:
• Setup
• Inspection and testing
• Cleaning work
• Maintenance work
To Next Page
Loading...
