19
Safety Precautions and Technical Details
DAA007EN - 11.05.2021
SAFETY FUNCTIONS AND SAFETY EQUIPMENT
3.4 Window pane(s)
The work area door is fitted with window panes. These window panes have the
required resistance class and provide:
• A view of the machining process
• Protection from objects that may be thrown out, e.g., chips, tools, or broken-off
parts of workpieces
• Protection from splashed coolant
The window panes must be inspected for damage, such as cracks, in accordance
with the maintenance instructions.
The window panes must be replaced every time they are damaged (e.g. if they
become cloudy or cracked) because their protective effect is no longer guaranteed.
The year of manufacture is indicated on the window panes.
When the interval specified in the maintenance instructions expires, the window
panes must be replaced even if they are not damaged.
3.5 Splinter protection film on the design pane
For additional safety, one
1)
special highly transparent splinter protection film is af-
fixed to the outside of the design pane.
Danger from flying splinters!
The splinter protection film affixed to the design pane to pro-
tect against splinters must never be removed!
1) On some machine types, two safety films are used.
3.6 Clamping conditions
A description of clamp stroke monitoring is included in the respective user docu-
mentation.
The monitoring measures designed to ensure the clamping conditions (e.g. clamp-
ing stroke monitoring, clamping pressure monitoring) must not be bypassed.
To Next Page
Loading...
