26
Safety Precautions and Technical Details
DAA007EN - 11.05.2021
INSTRUCTIONS FOR SAFETY-CONSCIOUS WORK
4.2 Handling of tools
4.2 .1 Changing tools
When tools are changed, there is a risk of injury from protruding and sharp-edged
tools.
In general:
• Suitable personal safety equipment must be used.
• Tool carriers must be moved to an ergonomically convenient position.
• Suitable protective measures must be taken (e.g., cloth or protective sleeves) for
protruding tools (e.g., boring bars).
• Suitable tools (e.g., torque spanner with extension) must be used.
• The required torque must be observed. The relevant specifications can be found
in the data sheets of the tool holders.
• When using laser systems for tool breakage monitoring, avoid looking directly
into the laser source.
• For live tools and tool holders, the maximum permitted rotational speed and
corresponding balance quality must be maintained.
4.2.2 Mechanical interface
Use only tools and tool holders that are designed for the corresponding mechanical
interface and match the technical data of the tool mounting. The operator/owner is
responsible for the correct installation of the tools or tool holders.
To Next Page
Loading...
