37
Safety Precautions and Technical Details
DAA007EN - 11.05.2021
SAFETY INSTRUCTIONS FOR DIFFERENT LIFE PHASES
6.2 Setup, installation, and commissioning
The load-carrying capacity of the floor must be observed. It must be chosen such
that, when the machine is installed, the machine legs do not rest on openings in the
floor (e.g., manhole covers) and there are no crushing or shearing points around the
machine. The latter applies particularly to all movable parts of the machine (e.g., cov-
ers and doors). The required specifications can be found in the user documentation.
To avoid unintentional movements, the machine must be switched off before re-
moving the transport locks.
Any hydraulic, pneumatic, or electric lines or hoses damaged during transport must
be replaced immediately. The hydraulic and cooling lubricant equipment must be
checked (for leak tightness) before being switched on.
To Next Page
Loading...
