Inficon 3000 Micro GC - 3000 Micro GC Guide 1; Configuring a PC for a Direct Connection to 3000 Micro GC Via the Crossover Cable

1 - 1
PN 074-558-P1A
3000 Micro GC Guides
3000 Micro GC Guide 1
Configuring a PC for a Direct Connection to
3000 Micro GC via the Crossover Cable
Table 1-1 Configuring a PC for a direct connection via the crossover cable
Step Description
1 Connect one end of the crossover cable (PN 5183-4649 provided in the ship kit) to a
TCP/IP ethernet port on the PC. Connect the other end to the ethernet port on the back of
3000 Micro GC.
2 Turn the 3000 Micro GC power switch, located on its front, to the on position. The switch will
illuminate green to indicate that 3000 Micro GC is on. Wait three minutes for the instrument
to load.
3 Click (Windows) Start >> Connect to >> Show All Connections.
NOTE: Depending on the version of Windows, this navigation path my vary.
4 On the Network Connections window, double-click Local Area Connection.