Inficon 3000 Micro GC - Chapter 1: Introduction to the 3000 Micro GC; About the Instrument

3 - 1
PN 074-558-P1A
3000 Micro GC Guides
3000 Micro GC Guide 3
Changing the Instrument IP Address
Table 3-1 Changing the Instrument IP Address
Step Description
1 The IP address of the instrument can be changed through the embedded web page.
NOTE: Consult an IT professional to assist with IP settings.
2 Open a web browser, such as Internet Explorer.
3 In the address bar, type the current IP Address of the instrument. Press Enter.
NOTE: The factory default IP address is set at 10.1.1.101.
4 The instrument’s embedded web page will display. Click the IP Configuration tab. The current
IP address for the instrument is displayed. Click Make Changes.
5 When prompted for a User name and Password, type ipconfig for both. Click OK.