Inficon 3000 Micro GC - Page 14

1 - 4
PN 074-558-P1A
3000 Micro GC Guides
12 Click (Windows) Start >> Run.
13 In the Run window, in the Open: box, type ping 10.1.1.101. Click OK.
14 Verify from the Command Prompt that the PC is receiving data packets from the instrument.
NOTE: If the command prompt reads Request Timed Out or Detection Limit Unreachable,
repeat steps 3 to 7 to verify IP settings. Verify that 3000 Micro GC is turned on
and connected to the PC via the crossover cable. If there is still no communication
contact INFICON.
Table 1-1 Configuring a PC for a direct connection via the crossover cable (continued)
Step Description