4 - 2
PN 074-558-P1A
3000 Micro GC Guides
6 Under Connection, select the carrier gas connection that corresponds to the desired GC
module. Click Submit.
NOTE: Entries m1 and m2 represent channels A and B, respectively.
Entries m3 and m4 represent channels C and D, if installed.
NOTE: In the example shown above, carrier1 is assigned to modules m1 and m2.
Carrier2 is unused.
7 Select the new carrier gas type from the drop-down list. Click Submit.
8 The column heaters will turn off to avoid thermal shock and degradation. Click Check Status to
view the current column temperatures.
Table 4-1 Changing the carrier gas configuration (continued)
Step Description
To Next Page
Loading...
