Inficon 3000 Micro GC - 3000 Micro GC Chassis Types

6 - 2
PN 074-558-P1A
3000 Micro GC Guides
5 Double-click the INFICON 3000 Micro GC icon in the Configured modules panel to open the
INFICON 3000 Micro GC Configuration window.
6 On the INFICON 3000 Micro GC Configuration window. Click the Connectivity tab. In the
IP address: box, type the IP address of 3000 Micro GC. Click Load Configuration from GC….
Once the 3000 Micro GC configuration has been properly loaded into EZ IQ, a Configuration
loaded successfully from GC device or GC Configuration Available message will display.
7 Click OK to exit the INFICON 3000 Micro GC Configuration window.
8 Click OK to exit the INFICON 3000 Micro GC Enhanced Driver window.
9 Click OK to exit the Instrument Configuration window.
10 Click Close to exit the EZ IQ Configuration window.
Table 6-1 Configuring 3000 Micro GC with EZ IQ (continued)
Step Description