Inficon 3000 Micro GC - Sample Inlet Filter Installation

18 - 2
PN 074-558-P1A
3000 Micro GC Guides
3 Click Remove.
NOTE: Once a Standard GC module is decommissioned, it can not be used again
until it is recommissioned.
4 Click Remove, adjacent to the desired Standard GC module to be decommissioned.
A caution will display. Click OK to decommission the Standard GC module.
5 Click Shutdown on the confirmation message to begin shutting down the instrument.
Table 18-1 Changing a standard module (continued)
Step Description