18 - 8
PN 074-558-P1A
3000 Micro GC Guides
20 Lower the back of the GC module into position until there is enough clearance to position it into
place under the lip of the inlet manifold frame. At the same time, ensure the GC module inlet
fitting mates with the Swagelok
®
fitting in the 3000 Micro GC inlet manifold.
Slide the GC module towards the front of 3000 Micro GC until it is fully seated into the Swagelok
fitting in the 3000 Micro GC inlet manifold.
Table 18-1 Changing a standard module (continued)
Step Description
Install GC
below frame
Mate module
fittings
View from back of 3000 Micro GC
manifold
module
To Next Page
Loading...
