Inficon 3000 Micro GC - Page 76

18 - 10
PN 074-558-P1A
3000 Micro GC Guides
27 In the web browser address bar, type the instrument IP address.
28 Click the Utilities tab.
29 Click Change Module Configuration.
30 Click Set.
31
Use the drop-down list on the lower left portion of the screen to select the correct physical
address for the new standard GC module. Each physical address corresponds to a channel
number. Valid 3000 Micro GC physical addresses are 1 through 4.
Table 18-1 Changing a standard module (continued)
Step Description