1
Declaration Of Conformity
This is to certify that this equipment, designed and manufactured by
INFICON
®
Inc., 2 Technology Place, East Syracuse, NY 13057 USA
meets the essential safety requirements of the European Union and
is placed on the market accordingly. It has been constructed in
accordance with good engineering practice in safety matters in force
in the Community and does not endanger the safety of persons,
domestic animals or property when properly installed and
maintained and used in applications for which it was made.
Equipment Description . . . .TEK-Mate® Refrigerant Leak Detector
Applicable Directives. . . . . . 73/23/EEC as amended by 93/68/EEC
89/336/EEC as amended by 93/68 EEC
Applicable Standards . . . . .EN 61010-1: 1993 EN55011, Group 1,
Class A: 1991 EN50082-1: 1992
CE Implementation Date. . .March 1, 1997
Authorized Representative . Gary W. Lewis
Vice President, Quality Assurance
INFICON Inc.
Any questions relative to this declaration or to the safety of INFICON's
products should be directed, in writing to the quality assurance
department at the above address.
W
ARNING
This symbol is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature accompanying
the instrument.
To Next Page
Loading...
Need help?
General
