3
TEK-Mate's Features And Specifications
TEK-Mate combines sophisticated technology with durability for an
instrument with outstanding sensitivity that's Laboratory Accurate,
Toolbox Tough™.
Electrochemical heated-diode sensor.
"No-reset" detection of CFCs, HCFCs, and HFCs.
Automatic adjustment (zeroing) to refrigerants in leak test area.
Rugged flexible probe with a foam filter for sensor protection.
High/Low leak-sensitivity and ON/OFF in one switch.
Variable-pitch audible leak signal.
To get the best performance from your TEK-Mate Leak Detector,
please read this manual carefully before you start using it. If you
have any questions or need additional assistance, please call
800-344-3304. We'll be happy to help you!
Specifications
Usage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indoor or Outdoor
Minimum sensitivity to R12, R22, and R134a . . . . 0.4 oz/yr (11 g/yr)
Operating temperature range . . . .+32 ˚F to 113 ˚F (0 ˚C to +45 ˚C)
1
Storage temperature range . . . +14 ˚F to + 140 ˚F (-10 ˚C to +60 ˚C)
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95% RH NC Max.
Altitude . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6500' (2000 m)
Power Supply . . . . . . . . . . . . . . . . . . . Two “D” cell alkaline batteries
Battery Life . . . . . . . . . . . . . . . . . . . . . . . . . Approximately 16 hours
Pollution degree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Overvoltage category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Weight (with power cells) . . . . . . . . . . . . . . . . . . . . 1.28 lb (0.58kg)
1
May be operated for a limited time in lower temperature environments.
To Next Page
Loading...
