tinb07e1-e 2011-07 Vacuum Gauge Controller 49
9 Storage and disposal
9.1 Packaging
Please keep the original packaging. The packaging is
required for storing the Vacuum Gauge Controller and for
shipping it to an INFICON service center.
9.2 Storage
The Vacuum Gauge Controller may only be stored in a
dry room. The following requirements must be met:
9.3 Disposal
The product must be disposed of in accordance with the
relevant local regulations for the environmentally safe
disposal of systems and electronic components.
Ambient temperature -20…+60 °C
Humidity As low as possible. Prefera-
bly in an air-tight plastic bag
with a desiccant.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
