Infineon TLE92464ED - Page 5

User Manual 5 V1.1
2021-05-03
Next Generation Solenoid Driver
Evaluation Kit User Manual
Figure 4 Communication Interface Connector X3
Table 2 Communication Interface Connector X3
Pin no.
Arudino™ Signal Name
Evaluation PCB Signal Name
Description
1
IO8
CS1#
SPI Chipselect signal for multiply
Evaluation PCB use. Note: R7 must be
assembled.
2
IO9
MC-CLK
TLE92464ED Clock input signal from the
microcontroller. Note: R13 must be
assembled and R12 disassembled.
3
IO10
CS0#
SPI Chipselect signal
4
IO11
MOSI
SPI Master Out Slave In
5
IO12
MISO
SPI Master In Slave Out
6
IO13
SCLK
SPI Clock (max. 8 MHz)
7
GND
GND
Ground
8
AREF
AREF
Analog reference Pin - not connected
9
SDA
SDA
I2C SDA Pin – close DIP switch 2 to use it
as reset signal source (digital IO)
10
SCL
SCL
I2C SCL Pin – close DIP switch 1 to use it
as reset signal source (digital IO)