Accessing the Infoblox 2200 Series Appliance
30 Infoblox Installation Guide
Note: User names and passwords are case-sensitive.
4. Read the Infoblox End-User License Agreement and click I Accept to proceed. The Setup Wizard opens for
defining basic network and deployment settings.
5. Determine how you want to deploy the appliance, and use the following worksheets to note the network
settings that you want to enter on the wizard screens. If you are configuring an HA pair, you must configure
each node individually.
* For grid member
** For an independent appliance
Use the following worksheet when configuring an independent HA pair:
Settings Enter your information here
Grid Name
Shared Secret Host Name
Grid Master’s IP Address
LAN1 Port IP Address and Netmask
Gateway IP Address
*Port Settings
**Admin Password
**Local Date, Time, and Time Zone - or -
NTP Server IP Address
Settings Enter your information here
System Name
Shared Secret
Host Name
Virtual Router ID
VIP (Virtual IP) Address and Netmask
Node 1: HA Port IP Address
Node 2: HA Port IP Address
Node 1: LAN1 IP Address
Node 2: LAN1 IP Address
Gateway IP Address
Admin Password
Local Date, Time and Time Zone - or -
NTP Server IP Address
To Next Page
Loading...
Need help?
General
