InFocus IN112 - User Controls; Remote Control Battery Installation

19
English
User Controls
Remote Control Battery Installation
Press rmly and slide the 1.
battery cover off.
Put the cover back.3.
Install new battery into the 2.
compartment. Remove the
old battery and install new
one (CR2025). Ensure that
the side with a “+” is facing
up.
M
n
O
2
-
L
i
C
E
L
L
3
V
O
L
T
S
J
A
P
A
N
H
CR2025
3
V
O
L
T
S
CR2025
M
3
V
O
L
T
S
CR2025
To ensure safe operation, please observe the following pre-
cautions :
Use CR2025 type battery. `
Avoid contact with water or liquid. `
Do not expose the remote control to moisture or heat. `
Do not drop the remote control. `
If the battery has leaked in the remote control, carefully wipe `
the case clean and install new battery.
Risk of an explosion if battery is replaced by an incorrect type. `
Dispose of used battery according to the instructions. `