InFocus IN112 - User Controls; OSD Menu Options Explained

26
English
User Controls
Main Menu Sub Menu
Settings
Projector ID 0~99
Audio Settings Internal Speaker On / Off
Mute On / Off
Volume 0~10
Audio Input Default / AUDIO1 / AUDIO2
Advanced Logo Default / Neutral
Closed Captioning Off / CC1 / CC2
Exit
Input Source
#3
VGA1 / VGA2 / Video / S-Video / HDMI
Source Lock On / Off
High Altitude On / Off
Information Hide On / Off
Keypad Lock On / Off
Test Pattern None / Grid / White Pattern
#7
IR Function On / Off
Background Color Black / Red / Blue / Green / White
Advanced Direct Power On On / Off
Auto Power Off (min) 0~180
Quick Resume On / Off
0~990
Active / Eco.
Exit
Lamp Settings Lamp Hours
Lamp Reminder On / Off
Brightness Mode Bright / Eco. / Dynamic
Lamp Reset Yes / No
Dynamic Dimming On / Off
Exit
Optional Filter Settings
Yes / No
Filter Usage Hours 0~9999
Filter Reminder Off / 300hr / 500hr / 800hr / 1000hr
Filter Reset Yes / No
Exit
Reset Yes / No
OPTIONS
SETUP
Optional Filter Installed
Power Mode (Standby)
Sleep Timer (min)
Please note that the on-screen display (OSD) menus vary according to the
signal type selected and the projector model you are using.
(#1) “Color” and “Tint” are only supported in Video mode.
(#2) “Signal” is only supported in Analog VGA (RGB) signal.
(#3) For HDMI Source only.
(#4) For XGA model only.
(#5) For WXGA model only. 16:9 or 16:10 depend on “Screen Type” setting.
(#6) “3D Sync Invert” is only available when 3D is enabled and this mode
3D is for DLP link glass only.
(#7) The function depends on model’s specications.