9
Optional computer connections
To get sound from the projector, connect an audio cable (optional cable, not
included) to your computer and to the Audio 1 or Audio 2 connector on the
projector. (Default settings are as follows: Audio 1 is used with VGA 1 and
VGA 2; Audio 2 is used with S-video and composite.) You can also assign a
your source to a different audio in connector, see
page 23 and page 30. You
may also need an adapter.
If you are using a desktop computer and want to see the image on your
computer screen as well as on the projection screen, connect the computer’s
monitor cable to the Monitor Out connector on the projector.
NOTE:
Only VGA video is sent to the Monitor out connector
.
To advance slides in a PowerPoint presentation using the remote control,
plug a USB cable between the projector’s
USB
connector and your computer.
Then press the up and down arrow buttons on the remote control to move
through your slides.
IN2114 & IN2116 only: To display a presentation from a USB flash drive, see
the Using LitePort section on
page 37. This feature eliminates the need for a
computer source and can be integrated with common wall plates and con-
ference room input/output panels.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
