InFocus IN2114 User Manual

8
Connecting power
Connect the black power cord to the Power connector on the rear of the
projector and to your electrical outlet. The Power light on the Status
Indicator Panel (page 14) turns amber.
NOTE: Always use the power cord that shipped with the projector.
Connecting a computer source
VGA connection
Connect one end of the provided computer cable to the VGA 1 or VGA 2
connector on the projector and the other to the VGA connector on your
computer. If you are using a desktop computer, you will need to disconnect
the monitor cable from the computer’s video port first (you can connect this
monitor cable to the Monitor Out connector on the projector, see next page).
Connect power cord
Connect computer cable
All manuals and user guides at all-guides.com

InFocus IN2114 Specifications

General

Projection technology	DLP
Contrast ratio (typical)	2100:1
Projector native resolution	XGA (1024x768)
Aspect ratio	4:3, 5:4, 16:9
RS-232 ports	1
Dimensions (WxDxH)	116.8 x 241.3 x 315 mm
Power requirements	100 - 240 V 50 - 60 Hz
Connectivity technology	Wired
Lamp power	185 W
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	4000 h
RMS rated power	10 W
Number of built-in speakers	2
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	28 dB
Power consumption (typical)	228 W
Product type	Standard throw projector

Weight and Dimensions

Weight	3180 g