29
Setup menu
Language: Allows you to select a language for the onscreen display.
Network: (IN2114 & IN2116 only) Allows you to setup network settings. See
page 33 for details on network configuration and operation.
• DHCP: Turns the DHCP on or off.
• IP Address: Assign Network IP Address.
• Subnet Mask: Assign Network Subnet Mask.
• Default Gateway: Assign Network Default Gateway.
• WINS Host Name Lookup: Turns WINS Host Name Lookup on or off.
• Host Name: Shows the host name.
• MAC Address: Shows network MAC Address value.
• Show Network Messages: Turns network messages on or off. Network
messages display the projector’s IP address (and host name if enabled)
when the projector is also displaying source messages.
• Restart Network…: Restarts the network.
• Network Factory Reset…: Performs factory reset.
Key Click: Turns the key click sound on or off. When this setting is on,
pressing keys on the keypad causes the projector’s speaker to play a “click”
sound.
Custom Key: Allows you to assign a different function to the Custom button,
allowing you to quickly and easily use the effect. Highlight an effect and
press Select to choose a different one.
• Source Info: The default action. Shows the Source Info menu.
• Projector Info: Shows the Projector Info menu.
• Aspect Ratio: Sets the ratio of image width to image height (see page 13
and page 27).
• Auto Image: Resynchronizes the projector to the source (page 24).
• Overscan: Removes noise around the image.
• Blank Screen: Displays an empty screen.
• Freeze Screen: Pauses the projected image.
• Mute: Turns off all sound.
• AV Mute: Enables or disables AV Mute function.
• Source: Cycles through available sources.
• Closed Captions: Enables or disables Closed Captions.
Blank Key: Select what to display when the blank key on the remote is
depressed: your custom snapshot, a solid color screen (blue, black or white),
the factory logo screen, a timer, or test patterns. The timer option is useful
for classroom tests or break times during meetings.
Source Keys: Enables or disables Source Keys on the optional Commander-2
remote.
AC Power On: When this feature is on, the projector automatically turns on
when electrical power is connected. This allows control of ceiling mounted
projectors with a wall power switch.
Auto Off Time: Automatically turns the projector off after no signals are
detected for a preset number of minutes. If an active signal is received
before the projector powers down, the image will be displayed.
Screen Save Time: Automatically blanks the screen with a black color after no
signals are detected for a preset number of minutes. The image returns
when an active source is detected or a remote or keypad button is pressed.
Sleep Timer: Allows the projector to automatically power off after it has been
on for a specified amount of time.
Always-On Functions: Allows you to control which projector functions will
work even when the projector is in standby (powered off but connected to
AC Power). Press Up or Down to highlight the function you want to
change, then press select or left and right to change the function to either
Yes or No. Press menu when done. Note that some functions must always
have the same value; in this case when you change one value, other values
in the submenu may also change automatically.
Lamp Low Power: Toggles between on and off. Turn it on to lower the light
output of the lamp. This also lowers the fan speed, making the projector
quieter.
Power Sounds: Controls whether the projector makes a sound when
powered on and off.
Internal Speakers: Allows the user to turn on and off the internal speakers.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
