InFocus IN2114 User Manual

40
Maintenance
Cleaning the lens
1 Turn the projector off and unplug the power cord.
2 Slide open the lens cover, if the lens is covered.
3 Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
• Avoid using an excessive amount of cleaner, and don’t apply the
cleaner directly to the lens. Abrasive cleaners, solvents or other harsh
chemicals might scratch the lens.
4 Lightly wipe the cleaning cloth over the lens in a circular motion.
WARNINGS:
• Turn the projector off and unplug power cord before cleaning any part
of the projector.
• Do not open any cover on the projector, except the lamp cover.
• Do not attempt to service this product yourself as opening and remov-
ing covers may expose you to dangerous voltage and other hazards.
Refer all servicing to qualified service personnel.
All manuals and user guides at all-guides.com
all-guides.com

InFocus IN2114 Specifications

General

Projection technology	DLP
Contrast ratio (typical)	2100:1
Projector native resolution	XGA (1024x768)
Aspect ratio	4:3, 5:4, 16:9
RS-232 ports	1
Dimensions (WxDxH)	116.8 x 241.3 x 315 mm
Power requirements	100 - 240 V 50 - 60 Hz
Connectivity technology	Wired
Lamp power	185 W
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	4000 h
RMS rated power	10 W
Number of built-in speakers	2
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	28 dB
Power consumption (typical)	228 W
Product type	Standard throw projector

Weight and Dimensions

Weight	3180 g