English
53
ADDITIONAL INFORMATION
Projector dimensions and ceiling mount installation
To prevent damage to your projector, please use only approved InFocus ceiling mounts:
https://www.infocus.com/accessories/mounts
If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector
meet the following specications:
• Screw type: M6*10
• Minimum screw length: 10mm
Unit: mm
Lens
Note: Please note that damage resulting from incorrect installation will void the warranty.
Warning:
• If you buy a ceiling mount from another company, please be sure to use the correct screw size.
Screw size will vary depending on the thickness of the mounting plate.
• Be sure to keep at least 10 cm gap between the ceiling and the bottom of the projector.
• Avoid installing the projector near a heat source.
To Next Page
Loading...
