Infortrend EonStor GS 3000 Series - RAID Configurations

119
RAID Configurations for RAID Models
RAID Levels
0, 1(0 + 1), 3, 5, 6, 10, 30, 50, 60, and non-RAID disk spanning
Cache Mode
All drive channels are pre-configured and cannot be changed
Cache Memory
Write-through, write-back, and adaptive write policy
Number of LUNs
Pre-installed DRAM module with ECC, registered; in two DIMM
sockets
Multiple Target IDs/Host
Channel
Up to 32 per host ID, for a total of 1024 on all host channels
Aliases for Target IDs
Yes
Firmware on Flash Memory
Yes
DIMM Slot
Two DRAM module slot(s)
Hardware XOR
Yes
Real-time Clock
For event messages with time record and task scheduling
Configuration
Text-based firmware-embedded utility over RS-232C through the
serial cable
Telnet via an established network connection
The EonOne Manager program using in-band or Ethernet
connection
Performance Monitoring
Yes
Remote Control and
Monitoring
Yes
Event Broadcast/Alert
Yes, via Java-based EonOne Manager
Event Notification
Yes, via the EonOne manager
Hardware Connection
In-band over Fibre, SAS, or other host link types, out-of-band via
Ethernet or RS-232C
Configuration on Disk
Configuration data stored on disks so that logical drive assemblies
exist after controller replacement.
Failure Indicator
Faults are indicated via alarm, module LED indicators, LCD panel,
EonOne Manager, or terminal emulation.