66
High Availability IP SAN with Redundant RAID Controller
CH0 CH1 CH2 CH3
CH0 CH1 CH2 CH3
LD 0 LD 1 LD 2 LD 3
VLAN 0
VLAN 1
12 3 4 5 6
78 9 101112
A
B
12x
6x
8x
2x
9x
3x
10x
4x
11x
5x
7x
1x
Eth ernet
A
12x
6x
8x
2x
9x
3x
10x
4x
11x
5x
7x
1x
C
CH0 AID* CH1 AID* CH2 BID* CH3 BID*
HBA
CH0 BID CH1 BID CH2 AID
CH3 AID
EonPath EonPath
iSCSI RAID managed by redundant RAID controllers,
with a total of 8 host ports
iSCSI initiators, preferably PCI-E TCP/IP offload engine
(TOE) capable cards
Ports divided into 2 virtual LANs to separate access from
host to targets.
EonPath to manage the fault-tolerant paths with failover/
failback and load balance capabilities. Use EonPath
multipath software so that your operating system can
identify alternate paths to the same logical drive.
Remote replication functionality is not supported
using this configuration. For remote replication