Infortrend EonStor GS 3000 Series - Installing the Hard Drive Tray into the Enclosure

42
Installing the Hard Drive Tray into the Enclosure
Once the hard drives have been installed in the drive trays, install the drive trays into
the system.
WARNING
Each drive bay must be populated with a tray even if it does not contain a hard drive.
An empty bay will disrupt ventilation and the system might overheat.
NOTE
The design of the hard drive tray might differ from the pictures shown.
With the hard drive tray bezel opened, align and insert the tray into the enclosure.
Once fully inserted, close the tray till it’s snapped.