Infortrend EonStor GS 3000 Series - Management Console Connections; Connecting RAID System to External Consoles

80
Management Console Connections
Designation
Description
Designation
Description
1
Serial port (for Telnet access)
4
Local area network
2
DB9 to mini USB
5
EonOne/ telnet console
3
CAT5e LAN cable
1
2
3
4
5
DB9 to mini USB cable management connection
Connecting RAID system to external consoles
Serial port (mini USB): Use the cable supplied with the system to connect to mini
USB port. Ethernet port: An Ethernet cable should be supplied by the user.
NOTE
 ALWAYS connect to the primary controller.
 A null modem may be required if you are using a 3
rd
party cable.
The serial port’s defaults are:
Baud Rate
38400
Data Bit
8
Parity
None
Stop Bit
1
Flow Control
Hardware
For TCP/IP connection and firewall configuration please refer to EonOne online help
or User’s Manual. If your network environment is not running DHCP server protocols,
a default IP, <10.10.1.1> can be used if you are accessing for the first time.