Infortrend EonStor GS 3000 Series - Page 91

91
drive (when power is restored).
- Super capacitor temperature reading is abnormal
(out of the 0 to 35°C range).
- Super capacitor is not present.
OFF indicates that the cache is clean, and that the
Super capacitor is capable of sustaining memory in
case of power loss.
Blinking Amber indicates cached data is being
transferred to the flash module after the occurrence
of a power outage. Once the transfer is done, all
LEDs will turn off.
This signal is local to each controller.
4. Hst Bsy
Green
Blinking Green to indicate traffic on the host bus.