21
13. Press [Enter] and the terminal starts to communicate with
Global Payments via the mobile device and once the
transaction is complete, the receipt copy will be sent to the
mobile device.
10 – PRE-AUTH AND COMPLETION
(OPTIONAL)
Pre-auth is used at restaurants for credit transactions when the
terminal is NOT brought to the patron. Using pre-auth transactions
allows you to enter a different amount at the end of the transaction.
The original authorization is for the amount before tip (pre-auth) and
the final amount (completion) includes the tip.
Pre-Auth – Authorize the amount before tip:
1. Initiate Pre-Auth transaction on the mobile device.
2. On the iCMPsi terminal enter the clerk ID (if enabled) and press
[Enter].
3. Enter invoice# (if enabled) and press [Enter].
4. Hand the terminal to the cardholder.
5. Cardholder inserts/swipes the credit card number or merchant
manually enters card number.
6. If card number is manually entered, enter the expiry date.
7. Select the language is enabled.
8. The cardholder enters his/her PIN and presses [Enter].
9. The cardholder passes the terminal back to the merchant.
10. Press [Enter] and the terminal starts to communicate with
Global Payments via the mobile device and once the transaction
is complete, the receipt copy will be sent to the mobile device.
Completion – Complete the transaction for the final amount including
tip:
1. Initiate Pre-Auth Completion transaction on the mobile device.
2. On the iCMPsi terminal, press the key that corresponds to the
desired search option. NOTE: Cust PO# option is only for
commercial cards.
3. Press [F4] (Select) once the transaction is located.
To Next Page
Loading...
Need help?
General
