16
To Conduct a Contactless Transaction
1. Initiate the transaction on the mobile device (smartphone or tablet).
2. Follow the prompts on the iCMPsi terminal screen accordingly.
3. Bring the card firmly up to the active zone above the display (at
approximately 1 cm) and keep the card close to the display during
the transaction.
4. The iCMPsi has a row of four status lights at the top of the terminal
that will activate during a contactless transaction – the first status
light (left hand side) will be lit steadily to indicate that the
contactless display is in use but a card is not being read.
5. When a contactless card is presented in the contactless active
zone during a transaction, the second, third and fourth status lights
will be lit in turn.
6. When the transaction is successful, all four status lights will be lit
and the confirmation tone will be heard.
To Next Page
Loading...
Need help?
General
