24
1. At the idle menu press, [.,#*] for the administrator menu.
2. Key in the administrator name and administrator password and
press [Enter].
3. Select [3] or use the [F2] button to scroll down to highlight Setup
Menu.
4. Use [F2] button or press [6] to highlight Demo and press [Enter].
5. Select Yes to enable/disable demo mode and press [Enter].
6. Press [Cancel] to go to the demo idle screen.
NOTE:
The terminal must be removed from demo mode
before conducting live transactions. To return to
“live” mode, repeat the procedures in the steps
above.
14 – CLERK SETTINGS
The terminal application allows you to track transactions by individual
clerk. From the clerk menu, the user has the option to add or delete
clerk ID.
Add Clerk ID
This option allows you to add a clerk ID up to six (6) digits long on the
iCMPsi:
1. At the idle menu, press [.,#*] for the administrator menu.
2. Key in the administrator name and administrator password
press [Enter].
3. Select [1] to highlight Clerk Menu.
4. Select [1] to highlight Add ID.
5. Enter the new clerk ID and press [Enter].
6. Enter the new clerk name and press [Enter].
7. Terminal will display “Clerk ID Added” if the ID is successfully
added and then will prompt “Add another?”
8. Select Yes to another clerk ID or No to return to clerk menu.
To Next Page
Loading...
Need help?
General
