10
Basic Transactions (Credit and Debit Cards)
Refer to this section for information on what transactions are available and when to use them.
Begin a Transaction
In general, to begin a transaction, press [ ] to access the Main Menu and then select the transaction type
you wish to perform. Your terminal will guide you through the process
Sale
Perform a credit or debit card sale transaction when the card is present.
Display
Idle Screen
SALE
Enter Sale
Amount: $ 0.00
ICT250/IWL220/IWL250/ICT220 w IPP320
Press [ ] and [ ] to select Sale
Key in amount and press [ ]
Customer is prompted to Swipe/Insert/Tap/Key
1. Customer confi rms the sale amount
2. Selects Chequing or Savings (Debit Only)
3. Enter PIN and press [ ]
4. While terminal connects, do not remove card
For contactless (tap) transactions, the customer holds their card
over the terminal until the reader fl ashes and/or beeps.
Sale
Swipe/Insert/Tap/Key
Glisser/Insérer Carte/
Présenter/Taper Carte
Sale/Vente $0.00
APPROVED XXXX
Remove Card
Receipt prints and approval is displayed
Press [ ] to print the customer copy
What the customer sees:
To Next Page
Loading...
Need help?
General
