7_5_2 iSMP Power Requirements
The iSMP may be charged through the cradle accessory, or via the Multi-plug micro-USB cable. The device features a 1200mAh
battery which supports up to 800 card transactions and 66 hours in standby mode.
7_5_3 iSMP SAM and Micro SD Card Slots
There are no provisions for Secure Access Modules in the iSMP.
7_5_4 iSMP Interface Options
Interface options include Bluetooth class III and micro-USB AB slave for software upgrading or for charging for integration with
iPod Touch. Refer to the below image which shows the USB cable connection.
To Next Page
Loading...
